Double click on above image to view full picture

Zoom Out
Zoom In


Be the first to review this product

Product ID: T-0156-AF

Availability: In stock

HOLDING FIXTURE WITHOUT BASE PART# +T-0156-AF is available for purchase in increments of 1


Here’s a helpful device that enables you to securely hold, position and rotate small engines, transmissions, rear axle differentials and other components while you’re working on them leaving both hands free for work. This holding fixture will handle pieces weighing up to 250 lbs., and it offers 360° of rotation with positive stops at 90° increments. Three sides of the mounted unit remain fully exposed. The two arms on this fixture adjust to hold almost anything you can get two bolts into, holes on end of the arms 3/8" diameter. Shaft size is 1 1/2" in diameter. Features: Bench Mounts on SST-0156-BB Base (BASE SHOWN BUT NOT INCLUDED) Full 360 degree swing Will handle engines, transmissions and other components weighing up to 250 lbs. All Steel Construction with aluminum arms Allows work comfort at any angle Allows easy access to work on valve body Transmission Type: C6, AOD, AOD-E, AOD-EW, 4R70W, AXOD, AXOD-E, AX4S, AX4N, 904, 30RH, 998, 31RH, 999, 32RH,

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.