HOLDING FIXTURE  WITH BASE PART# T-0156-A

Double click on above image to view full picture

Zoom Out
Zoom In

HOLDING FIXTURE WITH BASE PART# T-0156-A

Be the first to review this product

Product ID: T-0156-A

Availability: In stock

$209.95
HOLDING FIXTURE WITH BASE PART# T-0156-A is available for purchase in increments of 1

Details

Here’s a helpful device that enables you to securely hold, position and rotate small engines, transmissions, rear axle differentials and other components while you’re working on them leaving both hands free for work. This holding fixture will handle pieces weighing up to 250 lbs., and it offers 360° of rotation with positive stops at 90° increments. Three sides of the mounted unit remain fully exposed. The two arms on this fixture adjust to hold almost anything you can get two bolts into, holes on end of the arms 3/8" diameter. Shaft size is 1 1/2" in diameter. Base will fit most other transmission holding fixtures, hole size is 1 5/8". Features: Bench Mounts w/ included base Full 360 degree swing Will handle engines, transmissions and other components weighing up to 250 lbs. All Steel Construction with aluminum arms Allows work comfort at any angle Allows easy access to work on valve body Transmission Type: C4, C5, C6, AOD, AOD-E, AOD-EW, 4R70W, AXOD, AXOD-E, AX4S, AX4N, 904, 30RH, 998, 31RH, 999, 32RH,

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.